盗墓笔记小说txt下载,欢乐颂第一季,穿越小说完本

PRODUCTS

Recommended products

Your current location: ProductsAPI ValveAPI Bevel Gear Globe Valve

J541H API Bevel Gear Globe Valve

Product overview

Product model: J541H
Nominal diameter: NPS2"-32"
Nominal pressure: Class150~900Lb
Operating temperature: carbon steel -29℃ ~ 425℃;
Low temperature steel -46℃ ~ 350℃,
Chromium-molybdenum steel -29℃ ~ 550℃.
Drive mode: electric, pneumatic, hydraulic, gear, etc
Design and Manufacture: ANSI B16.34BS1873
Structure Length: ANSI B 16.10
Pressure and temperature rating: ANSI B16.5
Testing and verification: API 598

J541H API Bevel Gear Globe Valve product details

J541H API Bevel Gear Globe Valve Product Description:

The opening and closing parts of the J541H API Bevel Gear Globe Valve are produced and sold by Baigang valve group plug-shaped clappers, the sealing surface is flat or conical, and the valve claw moves linearly along the center line of the fluid. Stem movement form, lifting rod (stem lift, hand wheel does not lift), there are lifting rotary rod (hand wheel with the stem rotating together, the nut is located in the valve body). Globe valve only applies to fully open and fully closed, does not allow for regulation and throttling.

API globe valve API and ASME standards, ASTM, ASTM is the material standard, not the valve itself; according to the American standard design, manufacture, production and testing of the globe valve is called the American standard globe valve. American standard stop valve and flange stop valve belong to the same type of valve, the closure is a valve flap, valve stem around the centerline for rotation to achieve open, close a valve.

J541H API Bevel Gear Globe Valve main advantages:

API globe valve in the pipeline is mainly used to cut off, distribution and change the flow direction of the medium. American standard stop valve is widely used in recent years, a new type of valve, which has the following advantages:

1, The fluid resistance is small, the resistance coefficient and the same length of the pipe section.

2, Simple structure, small size, light weight.

3, Close and reliable, the current gate valve sealing surface material widely used plastic, good sealing, vacuum system has also been widely used.

4, Easy to operate, quickly open and close, as long as the full turn to 90 degrees off, easy to remote control.

5, Easy maintenance, gate valve structure is simple, the seals are generally active, demolition and replacement are more convenient.

6, In the fully open or fully closed, the ball and seat sealing surface and media isolation, media will not cause the valve sealing surface erosion.

7, A wide range of applications, the path from small to a few millimeters, up to a few meters, from high vacuum to high pressure can be applied, the ball rotated 90 degrees, the entrance and exit should be all spherical, thus cutting off the flow.

J541H API Bevel Gear Globe Valve design standards:

Design and manufacture	Structure length	Flange size	Butt welding connection size	Pressure - Temperature	Test - test
ANSI B16.34 BS1873	ANSI B16.10	ANSI B16.5	ANSI B16.25	ANSI B16.34	API 598

J541H API Bevel Gear Globe Valve pressure test:

Nominal pressure PN (Lb)	Strength test		Water seal test		Gas seal test
Nominal pressure PN (Lb)	MPa	Lbf / in2	MPa	Lbf / in2	MPa	Lbf / in2
150	3.0	430	2.2	315	0.4-0.7	60-100
300	7.7	1110	5.7	815
600	15.3	2220	11.3	1630
900	23.0	3330	17.0	2445
1500	38.4	5560	28.2	4080
2500	64.0	9255	47.0	6790

J541H API Bevel Gear Globe Valve main dimensions and weight:

DN		150Lb convex flange (RF) main dimensions Dimensions (mm)								Weight
mm	in	L	D	D1	D2	b	n-φd	H	D0	Weight
15	1/2	108	89	60.5	35	11.2	4-16	241	100	6.9
20	3/4	117	98	69.9	43	12.7	4-16	241	100	9.8
25	1	127	108	79.2	51	14.2	4-16	242	125	13.5
32	11/4	140	117	89	63	16	4-16	280	160	19.5
40	11/2	165	127	98.6	73	17.5	4-16	286	160	28.5
50	2	203	152	120.7	92	19	4-19	368	200	18
65	21/2	216	178	139.7	105	22.4	4-19	387	200	30
80	3	241	190	152.4	127	24	4-19	411	250	41
100	4	292	229	190.5	157	24	4-19	454	250	64
125	5	356	254	216.0	186	24	8-22.5	455	350	86
150	6	406	279	241.3	216	25.4	8-22.5	541	350	113
200	8	495	343	298.5	270	28.4	8-22.5	651	450	178
250	10	622	406	362.0	324	30.2	12-25.4	800	450	270
300	12	698	483	431.8	381	32	12-25.4	1231	600	350
350	14	787	533	476.3	413	35	12-29	1450	600	460
400	16	914	597	539.8	470	36.6	26-29	1645	600	590

DN		300Lb convex flange (RF) main dimensions Dimensions (mm)								weight
15	1/2	152	95	66.5	35	14.2	4-16	241	140	7.7
20	3/4	178	117	82.5	43	16	4-19	241	140	11.3
25	1	203	123	89	51	17.5	4-19	283	160	16.8
32	11/4	216	133	98.5	63	19	4-19	320	200	21.2
40	11/2	229	155	114.3	73	20.6	4-22.5	322	200	32.6
50	2	267	165	127	92	22.4	8-19	399	200	25
65	21/2	292	190	149.4	105	25.4	8-22.5	438	250	30
80	3	318	210	168.1	127	28.4	8-22.5	464	280	35
100	4	356	254	200.2	157	31.8	8-22.5	565	350	56
125	5	400	279	235	186	35	8-22.5	614	350	96
150	6	444	318	269.7	216	36.6	12-25.4	717	400	120
200	8	559	381	330.2	270	41.2	12-25.4	930	500	212
250	10	622	444	387.4	324	47.8	16-28.5	1012	550	330
300	12	711	521	450.8	381	50.8	16-32	1231	600	472
350	14	762	584	514.4	413	54	20-32	1450	600	715
400	16	864	648	571.5	470	57.2	20-35	1645	600	920

Reminder:

All text, data and pictures in this article are for reference only.To see more details of the J541H API Bevel Gear Globe Valve performance parameters, structural dimension parameters, pricing, etc., or to request high quality printing samples, please Contact us.

Next：Stainless Steel Globe Valve

Previous：API Cast Steel Globe Valve